AU-70

The Sansui AU-70 is 25w per channel amp, using 4/ 7189A tubes, class AB, push pull. A 12AX7 for the preamp and also uses 4 Sony transistors for the microphone, phono, tape head amplification, this part of the circuit is bypassed in the aux and tuner mode. There are also treble and bass controls for each channel and a tone defeat switch. It measures 15.5” W x 12” D x 5” H and weighs 30 lbs. All capacitors, except the ceramics, have been replaced with values as close to the originals as could be found.The Sansui AU-70 is 25w per channel amp, using 4/ 7189A tubes, class AB, push pull. A 12AX7 for the preamp and also uses 4 Sony transistors for the microphone, phono, tape head amplification, this part of the circuit is bypassed in the aux and tuner mode. There are also treble and bass controls for each channel and a tone defeat switch. It measures 15.5” W x 12” D x 5” H and weighs 30 lbs.

Leave a Reply

Your email address will not be published. Required fields are marked *